美国 Magna Power MT系列 可编程直流电源 100KW,站立式机箱

主要特点
宽输出电压、电流范围：0-16 Vdc to 0-4000 Vdc 和 0-40 Adc to 0-24000 Adc
以标准的宽输入电压、频率范围:
从 380 Vac 到 480 Vac 频率： 50 Hz 和 60 Hz
**的可编程和监测
I/O标准通讯接口：37针电路标准的光隔离的用户I / O界面，*额外的隔离电路
**的运作：高达92％的效率在满载情况下
RS232接口标配（标准SCPI命令）：GPIB，USB，以太网，RS485接口可选
可选以太网LAN接口（LXI-certified Ethernet communications）:内嵌web-server
过压过流保护关闭标准(OCT&OVT STD): 过压保护和过流保护机械接触器高速断开主输入
可回馈电网选件（内置Models 250 kW+):
电能可回馈电网功能选件（Power Cycle AC Grid），自动谐波消除平衡系统，产生(6n±1)-12/18/24/48个脉冲高级的回馈电网技术
IVI驱动程序：多种可视化编程应用可支持Labview,Labwindows/CVI,IVI驱动等
前面板计量校准：
100 kW Models指标
Model	Voltage (Vdc)	Current (Adc)	Ripple (mVrms)	Eff. %	3Φ Input Current (Aac)
					380/415 V	440/480 V
MTA16-6000	0-16	0-6000	35	90	191	165
MTA20-5000	0-20	0-5000	40	90	191	165
MTA32-3000	0-32	0-3000	40	90	191	165
MTA40-2500	0-40	0-2500	40	91	191	165
MTA50-2000	0-50	0-2000	50	91	191	165
MTA80-1250	0-80	0-1250	60	91	191	165
MTA100-1000	0-100	0-1000	60	91	186	160
MTA125-800	0-125	0-800	100	91	186	160
MTA160-620	0-160	0-620	120	91	186	160
MTA200-500	0-200	0-500	125	91	186	160
MTA250-400	0-250	0-400	130	92	186	160
MTA375-270	0-375	0-270	170	92	186	160
MTA400-250	0-400	0-250	180	92	186	160
MTA500-200	0-500	0-200	220	92	186	160
MTA600-160	0-600	0-160	250	92	186	160
MTA800-120	0-800	0-120	300	92	186	160
MTA1000-100	0-1000	0-100	400	92	186	160
MTA1250-80	0-1250	0-80	500	92	186	160
MTA1600-62	0-1600	0-62	600	92	186	160
MTA2000-50	0-2000	0-50	800	92	186	160
MTA2500-40	0-2500	0-40	900	92	186	160
MTA3000-32	0-3000	0-32	1000	92	186	160
MTA4000-24	0-4000	0-24	1100	92	186	160
详细指标Specifications
Input
Nominal Voltage3 phase, 3 wire + ground	380 VAC (operating range 342 - 418 VAC)415 VAC (operating range 373 - 456 VAC)440 VAC (operating range 396 - 484 VAC)480 VAC (operating range 432 - 528 VAC)
Frequency	50 Hz (operating range 45 Hz - 55 Hz)60 Hz (operating range 54 Hz - 66 Hz)
Power Factor	> 92% at max. power 100 kW and 150 kW modules> 96% at maximum power 250 kW modules

Environmental
Operating Temperature	0°C to 50°C
Storage Temperature	-25°C to +85°C
Air Cooling	Front and rear intake, top exhaust

Physical
Power	Input Phases	Size (H" x W" x D")	Weight
100 kW150 kW250 kW500 kW750 kW1000 kW	3Φ3Φ3Φ3Φ3Φ3Φ	62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)62.5 x 72 x 31.5 in (158.8 x 182.9 x 80.0 cm)62.5 x 144 x 31.5 in (158.8 x 365.8 x 80.0 cm)62.5 x 216 x 31.5 in (158.8 x 548.7 x 80.0 cm)62.5 x 288 x 31.5 in (158.8 x 731.6 x 80.0 cm)	1600 lbs (725.8 kg)2100 lbs (952.5 kg)3300 lbs (1496.9 kg)6600 lbs (2993.7 kg)9900 lbs (4490.6 kg)13200 lbs (5987.4 kg)

Output
Ripple	See Model Charts
Line Regulation	Voltage Mode: ± 0.004% of full scaleCurrent Mode: ± 0.02% of full scale
Load Regulation	Voltage Mode: ± 0.01% of full scaleCurrent Mode: ± 0.04% of full scale
Load Transient Response	2 ms to recover within ±1% of regulated output with a 50% to ** or ** to 50% step load change
Efficiency	≥ 90%; See Model Charts
Stability	± 0.10% for 8 hrs. after 30 min. warmup
Isolation	User inputs and outputs:referenced to Earth groundMaximum input voltage to ground:±2500 VacMaximum output voltage to ground:±1000 Vdc for models less than or equal to 1000 Vdc,±4000 Vdc for models greater than 1000 Vdc.
Maximum Slew Rate	Standard Models:100 ms for an output voltage change from 0 to 63%,100 ms for an output current change from 0 to 63%.With High Slew Rate Option (+HS):6 ms for an output voltage change from 0 to 63%,12 ms for an output current change from 0 to 63%.
Bandwidth	Standard Models:3 Hz with remote analog voltage programming,2 Hz with remote analog current programming.With High Slew Rate Option (+HS):60 Hz with remote analog voltage programming,45 Hz with remote analog current programming.

Programming Levels and Accuracy of Full Scale
	VoltageSet Point	CurrentSet Point	OVTSet Point	OCTSet Point
Remote Analog Programming Accuracy	± 0.075%	± 0.075%	± 0.075%	± 0.075%
Digital Programming Accuracy	± 0.075%	± 0.075%	± 0.075%	± 0.075%
Remote Analog Programming Levels	0 - 10.0 Vdc	0 - 10.0 Vdc	0 - 10.0 Vdc	0 - 10.0 Vdc

Monitoring Levels and Accuracy of Full Scale
	Output Voltage	Output Current
Remote Analog Monitoring Accuracy	± 0.2%	± 0.2%
Digital Monitoring Accuracy	± 0.2%	± 0.2%
Remote Analog Monitoring Levels	0 - 10.0 V	0 - 10.0 V

Control Limits
Remote Sense Limits	3% maximum voltage drop from output terminals to load. Remote sense is not available for models with output voltages greater than 1000 Vdc.
Period Programming Limits	Minimum period: 10 msecMaximum Period: 9997 sec or 2.77 hours
Digital control inputs and outputs limits	Input voltage: 0 to 5 Vdc, 10K input impedance;Output voltage: 0 to 5 Vdc, 5 mA drive capacity5 V supply: 25 mA.